Features:

• Designed with spring, stop at any angle
• Pivots through 180°
• Manufactured from forged alloy steel, quenched and tempered
• Manufactured and tested in accordance with EN1677-1
• Load rated parts are 100% magnaflux crack detected
• Individual forged parts are traceable to Test Certification
• All YOKE Lifting points meet or exceed all the requirements of ASME B30.26
• Lugs designed to assist the welding process

Specifications:

• Dimensions:
  • (A): 146mm (5.75")
  • (B): 73mm (2.87")
  • (C): 82mm (3.23")
  • (D): 20mm (0.79")
  • (E): 30mm (1.18")
  • (F): 141mm (5.55")
  • (G): 53mm (2.09")
  • (H): 88mm (3.46")
  • (L): 191mm (7.52")
  • (W): 75mm (2.95")
  • (HV): 10mm (0.39")
  • (a): 4mm (0.16")

Note: A protected spring keeps the load ring in a required position. The parts are connected in such a way that they remain captive. The spring also reduces noise caused by vibrations. Never apply load except in the same direction with the pivot direction.