Data Center Fiber Inspection Kit

The WFM-100 helps inspect LC, SC, MPO 12-core, and MPO 16-core fiber connector end-faces, catching contamination before it degrades link performance or causes outages.

Clean fiber connectors using format-specific tools such as CLS-125/50 cleaning sticks for LC, CLS-250/50 cleaning sticks for SC or FCC-300 for LC/SC Single or Duplex, FCCS-120 for MPO 12-core, and FCCS-160 for MPO 16-core. If a dry clean is not enough, use the CWP-125 swabs, DW-90 dry wipes, FW-50 wet wipes, and FCF-3 Fiber Optic Splice & Connector Cleaner to wet clean the connector. This removes the oil and dirt that weaken the signal but are too small to see.

Measure insertion loss FPM-50S and verify fiber link performance FLS-50S across single-mode installations, covering commissioning sign-off, ongoing maintenance verification, and fast first-pass fault checks without requiring full OTDR setup.

Identify live fiber and confirm signal presence on active fiber runs without disrupting traffic, OFI-100 provides a safe, non-intrusive way to verify which fibers are in service before cleaning, patching, or rerouting connections in live data center environments.

Reach into high-density fiber patch panels for controlled connector insertion and removal where finger access is limited with the FCT-100, without disturbing adjacent live connections during inspection and cleaning work, and use the JIC-842 long nose pliers for gripping, bending, and cutting in tight spaces where standard hand access won't reach.

Keep all inspection, cleaning, and verification tools organized and field-ready in the BP-100 rugged technician backpack, built for technicians working across large hyperscale data halls, colocation facilities, and enterprise server rooms where fiber reliability directly impacts network uptime.