FallTech Contractor 3 D-Ring Climbing Harness

The FallTech 7018 Series Contractor harness has 3 D-rings with one on the back and one on each side. This harness has 5 point adjustability, tongue and buckle leg straps, lanyard keepers, mating buckle torso adjusters, and heavy-duty polyester webbing. The FallTech 7018 Contractor Harness is ideal for fall arrest and positioning.

Features:

• Three d-rings for fall arrest and positioning
• 5 points of adjustment (chest, legs, and torso)
• Torso keeper for stowing idle lanyard connector
• Paired mating buckle adjusters on the front torso.

Specifications:

• Webbing: Polyester; Min. 5,000 lbs.tensile strength
• D-Rings: Alloy Steel; Min. 5,000 lbs.tensile strength
• Buckles/Adjusters: Alloy Steel; Min. 3,375 lbs.tensile strength
• Tensile Strength: Min. 5,000 lbs.
• Max. Capacity: 425 lbs., To maintain ANSI Z359 compliance, limit total user weight to 310lbs
• OSHA: CFR1926.502, CFR1910.66
• ANSI: A10.32-2004, Z359.1-2007, Z359.12-2009