The FallTech Contractor+ Belted 3 D-Ring Harness is equipped with 1 back and 2 side D-rings. There is a breathable padded air mesh shoulder yoke with non-slip dorsal D-ring adjustment and low-profile spring-tension torso adjusters for added convenience while on the job. This harness features a 5 inch torso-sewn waist support positioning pad and paired dual fastening lanyard packs. It has tongue buckle legs and a mating buckle chest and complies with ANZI Z359.11-2014.

Features:

• Breathable padded air mesh shoulder yoke with non-slip dorsal D-ring adjustment
• 5 in torso-sewn waist support positioning pad
• Complies with ANSI Z359.11-2014
• Low-profile spring-tension torso adjusters
• Paired dual-fastening Lanyard Parks
• Tongue buckle legs
• Mating buckle chest
• Roller style adjusters

Specifications:

• Webbing: Polyester; Min. 5,000 lbs. tensile strength
• Keepers: Plastic
• D-Ring: Alloy Steel; Min. 5,000 lbs. tensile strength
• Buckles/Adjusters: Alloy Steel; Min. 3,375 lbs. tensile strength
• Grommets: Brass
• Should Strap Grab Handle: Vinyl
• Should Adjusters: Low-profile spring-tension Torso Adjusters
• Maximum Working Load: 425 lbs
• ANSI Capacity: 130 to 310 lbs. Max
• OSHA Capacity: 130 to 425 lbs.
• OSHA Standards: CFR1926.502 and CFR1910.66
• ANSI Standards: Z359.11-2014

Available Sizes:

• Small/Medium: (7073BSM)
• Large/XL: (7073BLX)
• 2X: (7073B2X)