Weiler Wolverine 4.5 inch conical flap discs deliver a fast cut rate and consistent performance at a good value when grinding steel and other metals. The type 29 conical disc shape maximizes surface contact when grinding between 15° – 35° for aggressive stock removal on flat surfaces while the 36 grit abrasive grain is best for heavy stock removal, edge beveling, and chamfering with an angle grinder. This disc offers a metal 5/8" - 11 nut that allows for quick changeovers and prevents the disc from sticking to the spindle. Wolverine is an aggressive, get it done product line for everyday general purpose use.

• High cut rate and consistent performance at a good value.
• Self-sharpening zirconia alumina (ZA) grains hold up under high temperatures and extreme pressure.
• Conical disc shape maximizes surface contact for aggressive stock removal on flat surfaces.
• 5/8" - 11 metal nut allows for quick spin-on, spin-off changeover and eliminates cross-threading or sticking to spindle due to heat build-up.
• Phenolic backing prevents scratching of the workpiece.
• Best on steel, cast iron and general use.