Safe-Tec En Forcer Flexible Line Sliding Bracket

The EN FORCER FLEXIBLE LINE SLIDING BRACKET is a fall protection device for working at heights. This set consists of a self-locking slide arrester (EN FORCER), which is joined to the flexible line by a 50 cm flexible extender (EX03*) and two Stec model steel connectors (COB*). EN FORCER has been tested to the requirements of NBR 14626 – Personal protective equipment against falls from a height – Guided sliding fall arrester in flexible line with extender. It must be installed on a flexible anchor line consisting of a 11 mm braided polyamide rope (core and cover NBR 15986). Use only on an anchor line of synthetic fiber ropes designed to be attached to a top anchor point. To be used in conjunction with other devices, these must meet current regulations. Each independent anchor point must have a mechanical strength greater than 15 kN, intended to fix the flexible anchor line. 

Features:

• Flexible sliding bracket
• Tested to the requirements of NBR 14626

Specifications:

• Body Material:   Stainless Steel
• Certifications:     NBR 14626 / CE: 0598 / CA36677 / CA: 36678
• Ropes:   Ø 10.5 < 12 MM
• Weight:    305 g